Photo: urirenataadrienn (Pixabay Content License)
Binding Wire
Annealed mild steel, 18 and 20 gauge, soft and knot-tight
Third-party weighment
Specification
| Material | Annealed mild steel wire |
|---|---|
| Gauges | 18 gauge (1.2 mm) and 20 gauge (0.9 mm) |
| Temper | Dead soft, ties without springing open |
| Finish | Black annealed, light oil |
| Consumption | Roughly 8 to 10 kg per ton of reinforcement |
Supply
| Sold | Per 25 kg coil, small lots per kg |
|---|---|
| Minimum | 1 coil |
| Delivery | Across Bengaluru, ORR plus 25 km |
| Lead time | Usually 24 to 48 hours from order confirmation |
| Brands | House and named brands |
Typical terms, not commitments. The quote confirms them for your quantity and pincode.
Details
Soft annealed tying wire that holds a knot. Underweight coils and springy half-annealed wire are the usual tricks in this trade; ours is sold by weighed coil and stays tied.
Variants
18 gaugeGeneral bar tying
20 gaugeLighter mesh and chair tying
From the site engineer's deskBudget about 9 kg per ton of steel. Running out of binding wire stops a bar-bending gang just as surely as running out of bars.
Today's rate for Binding Wire
More in TMT Steel
TMT Bars, Fe500
IS 1786, mill certificate with every consignment
Per ton, cut lengths per kgNamed brands
TMT Bars, Fe500D
IS 1786 ductile grade, the earthquake-detailing choice
Per ton, cut lengths per kgNamed brands
TMT Bars, Fe550
IS 1786 higher strength, where the design asks for it
Per ton, cut lengths per kgNamed brands