Photo: Praveenvatsa (CC BY-SA 4.0)
Fly Ash Bricks
IS 12894, machine pressed, uniform size, no burning
Test report availableFree sample
Specification
| Standard | IS 12894 pulverised fuel ash lime bricks |
|---|---|
| Size | 230 x 110 x 75 mm, tighter tolerance than clay |
| Compressive strength | 7.5 N per sq mm class, report per lot |
| Water absorption | Under 20 percent |
| Finish | Smooth faces, thinner plaster coats possible |
| Drying shrinkage | Within IS limits |
Supply
| Sold | Per 1000, part loads on request |
|---|---|
| Minimum | 2000 pieces |
| Delivery | Across Bengaluru, ORR plus 25 km |
| Lead time | Usually 24 to 48 hours from order confirmation |
| Brands | thing.homes house brand |
Typical terms, not commitments. The quote confirms them for your quantity and pincode.
Details
Pressed fly ash bricks with the uniformity that clay kilns cannot give: consistent size, square faces and stated strength. Walls come up plumb faster and take less plaster. A sensible default for internal masonry on a tight budget.
Variants
StandardGeneral masonry
High strengthWhere 10 N per sq mm class is specified
From the site engineer's deskTheir smooth face needs a splatter or bonding coat before plaster in some specs. Ask your engineer, then plaster accordingly.
Today's rate for Fly Ash Bricks
More in Blocks and Bricks
Concrete Solid Blocks
IS 2185, stated strength grade, 4, 6 and 8 inch
Per piece, sold in full pallet lotsHouse brand
Concrete Hollow Blocks
IS 2185 load class, lighter walls, conduit-friendly cores
Per piece, sold in full pallet lotsHouse brand
AAC Lightweight Blocks
IS 2185 Part 3, a third the weight of clay brick walls
Per piece, also quoted per cubic metreHouse brand